Axel Joost Electronics box version D

SKU: TJ99216
GTIN: 4054783191628
Category: Relais
Manufacturers: Axel Joost

Axel Joost electronic box version D, this control box is probably the most flexible box on the market. It controls all the main functions on the motorcycle.

only

192,80 €

incl. 19% VAT ,

Old price: 202,95 €

Discount: 5%

Manufacturers recommended retail price: 202,95 €

(Save 5%, i.e. 10,15 €)

Low stock level

Axel Joost electronic box version D

This control box is probably the most flexible box on the market. It controls all the main functions on the motorcycle. The following options are possible:
- Integrated flasher relay, controllable via pushbuttons or with switches
- Output for flashing control available
- 2 inputs for side stand - and neutral switch are implemented
- Adjustable turn signal reset and limiting light function of the turn signals (position light)
- An output for the flashing control - LED in the speedometer is integrated. This saves additional wiring effort.
- Control of high and low beam via pushbutton or switch
- Control of horn via pushbutton
- Control of brake light
- Control LED's on the outputs for easier monitoring of the functions
- Automatic detection of an optionally available handlebar adapter in button mode. You can find a handlebar adapter under \Accessories\.

By the way, the new D-Box can also be controlled with only 2 buttons. Therefore, no key combinations need to be memorized by the user:
- A short press on one of the two buttons switches on the respective turn signal. A further short press on one of the two buttons switches it off again.
- A slightly longer press and hold (over about 0.3 seconds) left switches the horn.
- A slightly longer press and hold (for about 0.3 seconds) right switches the starter.
- Two short button presses on the left side switch between high and low beam.
- Two short button presses on the right side switch the ignition on - or off.
- A short press on both buttons at the same time switches on the hazard warning lights function.
- The individual outputs are of course short-circuit proof and self-resetting after a short circuit.

By the way, the D-Box can also be used for Harley Davidson motorcycles with a TSM/TSSM module to control the TSM/TSSM module. A combination with the existing alarm system is thus possible without further ado. For this, the D-Box supplies a constant voltage to the turn signal outputs when the turn signals are activated.

Dimensions: 50 mm length x 12.5 mm width x 42 mm height
Current consumption: maximum 7mA at 12V
Housing: black impact-resistant ABS plastic, waterproof encapsulated
Input voltage: 6 - 18 volts
Connections: Control section 0.14mm², power section 0.75 mm², 1.5 mm² for supply cable, 15 cm each
Maximum output current: 5 amps light, 3 amps for the other outputs, current limit at 5 amps
Maximum ambient temperature: 80 degrees Celsius
Allowable current from 12V connection: 20 amps

Supplied: 1 piece

Tip:
If you have any questions about the appropriate box, you can use the table, or the following interactive video: https://www.youtube.com/watch?v=nietDWvNRro
You can find a short video on how to set up the box here: https://youtu.be/P8NdlLaev_Q

NOTE:
Replaces items 361-925 and 361-984.

There are no reviews yet.

Contact data

E-Mail